The HUNSN RJ17 is a fanless mini-PC which supports the i7-1165G7 11th Gen Intel processor. The device is offered as barebone or it can be configured with up to 32GB of RAM and up to 512GB of SSD storage. The HUNSN RJ17 mini-PC is offered with the i7 or i5 processors using Intel’s 10nm SuperFin […] ⌘ Read more
The HUNSN RJ17 is a fanless mini-PC which supports the i7-1165G7 11th Gen Intel processor. The device is offered as barebone or it can be configured with up to 32GB of RAM and up to 512GB of SSD storage. The HUNSN RJ17 mini-PC is offered with the i7 or i5 processors using Intel’s 10nm SuperFin […] ⌘ Read more
Kickstarter recently featured the Arduboy Mini which is an 8-bit video game console based on the Arduino platform. The tiny console includes more than 300 games and it can also be used to learn to code games using the tutorials from the Arduboy Community. As other Arduboy models released in the past (i.e. Arduboy FX), […] ⌘ Read more
Last week, iBASE released a fanless Mini-PC based on the quad-core i.MX 8M Plus processor from NXP. The ISR215 also includes one HDMI 2.0 port, M.2 Key-B (3052) for 5G connectivity and it can be configured with up to 4GB LPDDR4/128GB eMMC. The i.MX 8M Plus quad-processor was recently seen in a similar rugged PC […] ⌘ Read more
The Sipeed M1s is a compact module integrating the Bouffalo Lab BL808 RISC-V SoC module along with a NPU. The device also provides WiFi/BL, 802.15.4 Zigbee connectivity and support for interfaces such as UART, I2C, SPI, etc. The Bouffalo Lab BL808 SoC was also seen on the Ox64 embedded platform that was also released not […] ⌘ Read more
Minisforum recently launched a mini-PC powered by the 12th Gen Intel Core i9-12900H processor. The NAD09 is offered as barebone or it can be configured with up to 64GB DDR4 and 2TB SSD. Additionally, the NAD9 Mini-PC includes 1x GbE LAN port, 4x displays supporting 4K@60Hz, 2x 2.5” SATA slots, etc. Similar to the Morefine […] ⌘ Read more
The ARMedOne is a carrier board in E-ATX form-factor that can handle popular SO-DIMM computer modules like the Raspberry Pi CM3/CM4, Jetson Nano/Xavier/TX2 NX, NXP iMX8, etc. The product is expected to be released around mid-December 2022 on Kickstarter. The ARMedOne is a PC/Server mainboard capable of housing up to 28 computer modules from Raspberry […] ⌘ Read more
The Archer AXE300 from TP-LINK is a Quad-band Wi-Fi6/6E router supporting up to 15.6Gbps, OFDMA and MU-MIMO technology to provide fast connectivity to several devices at the same time. The device is also equipped with 4x GbE LAN ports, 1x 2.5Gbps WAN/LAN port and 2x 10Gbps WAN/LAN ports. The product page specifies that the Archer […] ⌘ Read more
CrowdSupply recently featured the EsPiFF SBC designed for multimedia, firewall and NAS applications. The EsPiFF combines a ESP32-WROVER module for wireless connectivity and a RP2040 chip functioning as a coprocessor. The ESP32-WROVER module featured is likely to be the ESP32-WROVER-IE-N16R8 since it provides up to 16MB of Flash memory, 8MB of PSRAM and a connector […] ⌘ Read more
Radxa has released an updated version of the E25 mini-router unveiled earlier this year. The Radxa E25 is based on the RK3568 providing dual 2.5 GbE LAN ports, SATA support and optional wireless connectivity. As the NanoPi R5S mini-router released around May 2022, the Radxa E25 is also built around the RK3568 SoC made in […] ⌘ Read more
Earlier this month, AAEON released an IoT Gateway targeting industrial edge gateway applications, Industry 4.0 and machine learning applications. The SRG-IMX8P is equipped with two GbE ports, 2x CAN-FD, 2x RS232/422/485 and support for wireless connectivity. The product page lists the i.MX8M Plus from NXP as the RISC processor of the SRG-IMX8P IoT Gateway. NXP […] ⌘ Read more
T-Mobile recently launched their first developer kit designed to speed up the development of IoT applications that require “transmitting small amounts of data over long periods of time.” The DevEdge is powered by a Cortex-M4 processor, wireless connectivity, diverse sensors and it runs on a Zephyr-based SDK. According to the datasheet, the DevEdge Dev Kit […] ⌘ Read more
Banana Pi’s new SBC board features the SenaryTech SN3680 SoC which combines a quad-core CPU, 6.75 TOPS NPU and a GE9920 GPU. The BPI-M6 also provides 4Kp60 display support, 1x GbE port, and optional wireless connectivity. The BPI-M6 mirrors the Raspberry Pi SBC design, however it’s powered by the Synaptics VS680 SoC which is populated […] ⌘ Read more
SolidRun recently unveiled an industrial-grade PC built around the AMD Ryzen Embedded V3000 processor. The Bedrock PC comes with up to 4x 2.5GbE LAN ports, 2x 10GbE LAN ports, 3x M.2 2280 sockets and optional wireless connectivity. According to the product page, the Bedrock PC integrates the 6 nm Zen 3 Ryzen V3C48 processor: Ryzen […] ⌘ Read more
Earlier this month, Digi International launched the compact Digi XBee RR embedded platform which supports Zigbee 3.0, 802.15.4, DigiMesh and Bluetooth Low Energy (BLE). The company is also offering the Digi IX15 IoT gateway/router to simplify IoT management. There are two variants of this new IoT module, they are the Digi XBee RR and the […] ⌘ Read more
Last week, e-con Systems introduced their first FPD-LINK III camera module for embedded vision applications. The NeduCAM25 integrates an AR0234 2MP sensor able to capture fast-moving scenes at 120 frames per seconds. According to the product page, the NeduCAM25 is based on the Semi AR0234 which is a 1/2.6inch 2-Megapixels CMOS digital image sensor offering […] ⌘ Read more
Topton is offering a Mini-PC sold as barebones or configured with up to 64GB DDR4/2TB NVMe. The TP-X4F also offers triple 4K @60Hz displays, three M.2 2280 NVMe for SSD storage and an it integrates an active cooling system. The AMD processors found on this TP-X4F are based on the TSMC 7nm FinFET process node. […] ⌘ Read more
SeeedStudio launched this week a compact router powered by the quad-core Rockchip RK3568. The LinkStar-H68K-1432 router offers dual 2.5 GbE ports, dual GbE ports, one HDMI port and SATA 3.0 support via USB Type-C. According to the product page, the LinkStar-H68K features the Rockchip RK3568 at its core. Rockchip RK3568 — Quad-core 64-bit Cortex-A55 (up […] ⌘ Read more
OnLogic just unveiled the Factor 200 Series which is built around the Raspberry Pi CM4. The new Factor is very similar to the Factor 201 released earlier this year, except that this version also includes a 2.7” capacitive touchscreen plus analog I/Os (DIO & AIO). As its predecessor, the Factor 202 is powered by the […] ⌘ Read more
Last week, SB Components released the SquaryPi and SquaryFi embedded platforms which are based on the RP2040 silicon and the ESP-12E respectively. Both devices feature a 1.54” LCD display along with various interfaces. The company is also offering an expansion PCB board to add and mix these embedded devices. As mentioned before, the SquaryPi […] ⌘ Read more
The WAFER-EHL from ICP is a 3.5” Single Board Computer built around the low-power 2.0 GHz Intel Celeron J6412. The SBC is available with dual 2.5GbE RJ45 ports, triple display support, 1x M.2 socket, 1x PCIe Gen3 x4 among other peripherals. The WAFER-EHL can be only configured with the 10nm Celeron J6412 System-on-Chip often seen […] ⌘ Read more
Aaeon released today a 1U rackmount network appliance based on the ICE-Lake-D LCC processors from Intel. The FWS-7541 features dual DDR4 SO-DIMM slots, 12x GbE LAN ports, 1x M.2 3052 slot, 1x M.2 2230 slot and other optional peripherals. According to the product announcement, the FWS-7541 is powered by the Intel Xeon D-1700 10nm processor […] ⌘ Read more
ADLINK just unveiled a camera development kit designed to quickly develop proof of concept applications. This AI Camera Dev Kit integrates the Jetson Nano (128 NVIDIA CUDA core + 4x Arm Cortex-A57) along with an 8MP color MIPI Sony IMX179 camera module, a single GbE port and up to 16Gb of eMMC storage. As stated […] ⌘ Read more
The Partaker J6412 is a Mini PC based on the 2.6 GHz Celeron processor along with Intel UHD graphics. This product offers triple 2.5GbE ports, triple display interfaces, an M.2 2280 socket, etc. Moreover, the device is offered as barebones or it can be configured with up to 16GB DDR4 and 512GB SSD. As mentioned […] ⌘ Read more
A few days ago, Orange Pi announced their new Single Board Computer based on the Octa-core Rockchip RK3588S SoC. Starting at $60, the new Orange Pi 5 includes up to 32GB RAM, 8K@ 60fps display support, one M.2 module for NVMe SSD. The new Orange Pi 5 implements the 8nm Rockchip RK3588S seen in other […] ⌘ Read more
The Arduino Opta is an embedded platform featuring STM32 STM32H747XI dual-core Cortex M7+M4 MCU for real time industrial applications. The device is offered in three variants which combine ethernet, RS485 support and wireless connectivity in addition to relays and 12-24V DC inputs. There are three Arduino Opta variants available, the Opta Wi-Fi, the Opta RS485 […] ⌘ Read more
Hardkernel just launched a new Odroid board based on the S922X hexa-core SoC. The Odroid-N2L doesn’t include ethernet support, but it comes with up to 4GB of LPDDR4, one 4K@60Hz HDMI, 40 I/O pins via expansion header and an eMMC connector. Unlike the RK3568B2 based ODROID-M1 also released this year, the N2L features the 12nm […] ⌘ Read more
The T8 Pro is a MiniPC featuring a 15W Celeron N5095 processor along with Intel UHD Graphics. This device provides support for up to three 4K displays, dual GbE ports, Wi-Fi 5 and a couple of USB 3.1 ports. Similarly to the BMAX seen a couple of days ago, the T8 Pro is only available […] ⌘ Read more
Last week T-Head semiconductors announced their XuanTie C908 which implements a 9-stage pipeline along with an AI acceleration engine for AR/VR apps. Similarly, SiFive also shared details about their new P670/P470 RISC-V processors for wearables and smart consumer devices. T-Head Semiconductor mentioned that the XuanTie C908 is offered in two architectures: RV32GCB[V] (32-bit) and RV64GCB[V] […] ⌘ Read more
Synology launched this week a Wi-Fi 6 router with transmission rates up to 600Mbps (2.4 GHz) and up to 2400Mbps (5 GHz). The WRX560 router features one 2.5GbE WAN/LAN port, one Gigabit WAN and up to three Gigabit LAN ports. The WRX560’s datasheet mentions that this product features a Quad-core processor (Up to 1.4GHz) along […] ⌘ Read more
CrowdSupply recently launched the Pocket Integrator, which is an add-on board for the compact programmable synthesizer/sequencer Pocket Operator released some years ago. This add-on board allows the user to control the time, tempo and also send MIDI & sync to the PO in real time. According to the product page, the microcontroller found on the […] ⌘ Read more
The MeLE PCG02 Pro is a fanless PC compatible with the Celeron J4125 or the Celeron N5105 Intel processors. The device is as big as an iPhone 14 pro, but it packs flexible peripherals such as dual 4K@60Hz HDMI ports, one GbE RJ45, dual UBS 3.2 ports, etc. The MeLE PCG02 Pro can be configured […] ⌘ Read more
The MYC-JX8MMA7 CPU Module from Myirtech, is an embedded platform powered by a Xilinx XC7A25T Artix-7 FPGA and a i.MX 8M Mini quad-core processor. The company is also offering a compatible dev board which provides access to one GbE, one HDMI port and several other peripherals. According to the datasheet, the MYC-JX8MMA7 features the […] ⌘ Read more
The BMAX B3 Plus is a MiniPC equipped with the Celeron 4-Core N5095. This product is enabled with dual band Wi-Fi 5, triple 4K@60Hz displays, dual GbE LAN ports and ships with Windows 11 Pro. The BMAX B3 is only available with the following 11th Gen Celeron processor: Celeron-N5095 — 4C/4T, 2.00GHz to 2.90GHz (15W […] ⌘ Read more
The RAK7391 WisGate Connect is an industrial gateway board powered by the Raspberry Pi Computer Module 4. This product also includes flexible peripherals such as dual GbE ports, camera connectors, and multiple expansion sockets for memory devices. According to RAKwireless, the WisGate Connect can support the whole Raspberry CM4 family. Broadcom BCM2711 – quad-core Cortex-A72 […] ⌘ Read more
The NanoPi R6S is the newest router Single Board Computer released by FriendyELEC. This SBC combines two 2.5GbE LAN ports, one GbE LAN port in addition to the Rockchip RK3588S octa-core SoC. According to the product page, the processor found in the R6S is the RK3588S which has been featured in other boards such as […] ⌘ Read more
This week, TUXEDO launched two variations of their latest InfinityBook Pro 16 laptop built around the i7-12700H Intel core processor. TUXEDO’s high-end laptop supports up to 64GB RAM, 2x M.2 2280 slots, Wi-Fi 6, 80Wh battery and other optional features. The Max Performance and the Workstation edition feature the same 12th Gen processor from Intel: […] ⌘ Read more
OKdo launched yesterday the Radxa ROCK 3 Compute Module (CM3) which is based on the Rockchip RK3566 System-on-Chip. The CM3 is currently offered with 2GB RAM/32GB eMMC, one GbE Ethernet PHY, dual displays, dual SATA ports and many other peripherals. The SoC found on the Rock 3 CM3 has the following features: Rockchip RK3566 SoC: […] ⌘ Read more~
Distec recently launched a fanless BOX PC compatible with Tiger Lake-U processors from Intel. The Box PC Pro NPA-2009 is equipped with a docking connector via V-by-one or DP to control external TFT displays. Other key features include dual GbE ports, one M.2 2280 slot, one M.2 2230 slot, one M.2 2242 and up to […] ⌘ Read more
AAEON released today the new BOXER-6645-ADS which is a fanless MiniPC that integrates various 12th Gen Intel processors along with Iris Xe Graphics. This MiniPC is equipped with 4x GbE ports, 8x USB 3.2 Gen2 ports, 2x SATA III interfaces and up to 64GB of DDR5. The chipset found on this MiniPC is the Intel […] ⌘ Read more
BIGTREETECH has unveiled a compact board equipped with a 64-bit Allwinner H616 processor. Additionally, the company is offering a compatible PI4B adapter which gives access to one LAN port, dual Micro HDMI ports, one USB Type-C and other standard peripherals. The System-on-Chip found on the BIGTREETECH CB1 board has the following specs: Allwinner H616 – […] ⌘ Read more
GMKtec has launched a MiniPC integrating the Celeron N4100 processor from Intel. The GMK NucBox 8 offers up to 6GB RAM, 128GB of eMMC, Wi-Fi5/BL4.2 and dual display support. According to the product page, the NucBox 8 from GMK features the following Intel processor: Celeron N4100 — 4C/4T, 1.10GHz – 2.40GHz (6W), 4M L3 Cache; […] ⌘ Read more~
SeeedStudio announced yesterday the A205E Carrier Board which is compatible with Jetson Nano/Xavier NX modules from NVIDIA. The A205 includes flexible peripherals such as dual GbE LAN ports, dual HDMI ports, one PCIe M.2 key-M for SSD storage, one M.2 Key for Wi-Fi/BLE, etc. According to the company, the A205E is compatible with the Jetson […] ⌘ Read more
The Eduponics Mini v2 is a platform built around the open source ESP32 microcontroller. This IoT board is equipped with useful sensors in agricultural apps such as temperature, humidity, soil moisture, etc. In addition to Wi-Fi//BLE connectivity, the Eduponics Mini v2 includes Grove connectors and IO expansion pins for additional peripherals. The ESP32 module featured […] ⌘ Read more
Pine64 announced a few days ago their latest SBC based on a dual-core RISC-V processor. The compact Ox64 is enabled with Wi-Fi 4.0, Zigbee BL5.0 in addition to an AI accelerator and up to 64MB PSRAM. The Pine64 mentions that the Bouffalo Lab BL808 System-on-Chip (SoC) integrates the Alibaba T-head C909 64-bit RISC-V core (up […] ⌘ Read more
This past week, Beelink released the GTR6 mini PC which is built around the powerful Ryzen 6900HX processor from AMD. The GTR6 is enabled with Wi-Fi6, Bluetooth 5.2, one 2.5GbE LAN port and up to 64GB DDR5. The Beelink GTR6 packs the following high-end processor with TSMC 6nm FinFET technology. Ryzen 9 6900HX— 8C/16T, 3.3GHz […] ⌘ Read more
GroupGets recently featured the gCore development kit designed for portable GUI-based applications. The dev kit is also compatible with an expansion board and a Teledyne FLIR Lepton FS to obtain thermal imaging capabilities. The MCU found on the gCore is the ESP32 WRover-B from Expressif Systems. This ESP32 module features two cores with an adjustable […] ⌘ Read more
The Topton FU02 is a fanless Mini PC featuring the Ryzen 3, 5, 7 mobile processors. This device is enabled with Wi-Fi6/BL5.2 along with dual GbE LAN ports and dual displays with 4K@60Hz resolution. The barebone model costs around ~$260-$318. The Topton FU02 integrates the following mobile processors with TSMC 7nm FinFET technology. Ryzen 3 […] ⌘ Read more~
Last month, Vecow released the EAC-5000 Series Edge AI computing system built around the latest Jetson AGX Orin platform. These rugged embedded devices provide up 275 TOPs of AI performance in addition to dual GbE LAN ports, 5x USBs, 2x CAN buses, 2x SIM card sockets and several other peripherals. Vecow is offering two EAC-5000 […] ⌘ Read more
Hardkernel recently introduced the ODROID-H3 and H3+ SBCs as successors of the ODROID-H2+ board released a couple years ago. These boards support up to 64GB RAM, dual 4K displays, dual 2.5 GbE ports and flexible storage interfaces. The 10 nm Intel processors found on the H3 and the H3+ have the following features: Celeron N5105— […] ⌘ Read more
CrowdSupply recently featured the Bee Motion S3 board which integrates sensors such as a PIR motion and a light ambient sensor. This open source board also provides a LiPo battery charge circuitry for portable IoT applications and a Stemma connector to easily integrate additional sensor boards. The Bee Motion S3 seems to feature the ESP32-S3 […] ⌘ Read more
Asus recently announced the ExpertCenter PN53 mini PC which features AMD Ryzen processors from the 6000H series. Some notable features of this mini PC include quad 4K displays, Wi-Fi6E/BL5.2, one 2.5GbE LAN ports and up to 32GB DDR5. The ExpertCenter PN53 features the following mobile processors with TSMC 6nm FinFET technology. Ryzen 5 6600H — […] ⌘ Read more
The EV40E67A Curiosity Board is a compact product built around the SAM9X60D1G SiP from Microchip Technology. The board features 1Gb of DDR2 memory, SD card readers, two CAN interfaces, a 24-bit LCD controller, one Fast ethernet port, etc. The EV40E67A board is based on the low-power ARM926EJ-S CPU (up to 600MHz) which belongs to the […] ⌘ Read more
Earlier this week, Lucid Vision Labs showcased diverse high speed cameras at Vision 2022. These Gigabit cameras offer bandwidth ranging from 2.5 to 25Gbps and some of them include Power-over-Ethernet support. The Triton 2 is a GigE camera integrating Sony Pregius S 4th Gen sensors. As seen below, the CMOS sensors range from 5.0 to […] ⌘ Read more
The WHLE-LS1 is a Single Board Computer (SBC) powered by QorIQ Layerscape processors targeting networking and industrial applications. This high-performing board offer four GbE LAN ports, up to 64 GB of eMMC storage and M.2 sockets for additional expansion. Conclusive Engineering is offering this board with the following NXP’s processors: WHLE-LS1026A – NXP LS1026A SoC […] ⌘ Read more
The Retroid Pocket 3 it’s a low-cost portable console based on the quad-core Unisoc T310 SoC. This handheld console packs a 4000mAh battery along with a 4.7” touch display, wireless connectivity support and a USB Type-C port for fast charging. The processor found on the Retroid Pocket 3 is the Unisoc T310 SoC usually found […] ⌘ Read more
Beelink announced their latest mini PC which is based on a 12th Gen i5 Core processor from Intel. The SEi12 offers up to 32GB of RAM, 500GB of SSD storage, dual 4K displays and dual fans for efficient cooling. As of now, the SEi12 mini PC only supports the following Alder Lake-U processor: i5-1235U — […] ⌘ Read more
The DA1470x is a BLE 5.2 SoC combining an Arm Cortex M33 processor along with a 2D GPU, PMU, Crypto Engine, voice detector and a 240 dMIPS FPU. Renesas also offers a Pro Development Kit giving access to all the GPIOs from the DA1470x and daughterboards with additional peripherals. The DA1470X SoC consists of an […] ⌘ Read more
ICP just released the ND118 board which comes in a PICO-ITX form-factor featuring the i.MX8M SoC from NXP. The ND118 provides up to 8GB of RAM, up to 32GB of eMMC storage, one GbE LAN port, dual display support and many other features. The i.MX8M SoC integrates a dual core Cortex-A53 processor or a quad-core […] ⌘ Read more
SeeedStudio recently launched the DeskPi Super6C CM4 Cluster board which can accommodate up to 6 Raspberry Pi CM4 modules. This cluster board comes with a mini-ITX form factor providing access to 2x GbE LAN ports and M.2 sockets for each CM4 module. As seen below, the Super6C offers one M.2 socket and one MicroSD card […] ⌘ Read more
The Mitac E410-13CMI is an industrial grade embedded system powered by the Intel Comet Lake 10th Gen processor. This fanless PC provides support for dual 4K displays, up to 64GB RAM, 512GB SSD, Wi-Fi 6/Bluetooth 5.1 and several other peripherals. The Mitac E410-13CMI embedded system ships the following processor only: i3-10100T — 4C/8T, 3.0GHz – […] ⌘ Read more
Polywell Computers recently unveiled a fanless Box PC integrating the Rockchip 3588 SoC to target digital kiosks, network security and other commercial applications. The X58 Box PC offers up to 8GB of RAM, 64GB of eMMC storage, dual GbE LAN ports and onboard wireless connectivity. The RK3588 SoC consists of a quad-core A76 (up to […] ⌘ Read more
The RelayFi is a soon to be launched board featuring an ESP32-WROOM SoC and 4 channel relays to control up to 4 high-voltage devices. The RelayFi is also compatible with Alexa, Google assistant and other single board computers. The RelayFi seems to feature the ESP32-WROOM-32D module which is enabled with 802.11 b/g/n Wi-Fi and Bluetooth […] ⌘ Read more
The ZBOX edge CI342 is a fanless Mini PC built around the Pentium N6415 processor along with Intel UHD graphics. The Mini PC supports up to 32GB of RAM, one M.2 2242/2280 socket and Wi-Fi 6E/Bluetooth 5.2 connectivity. The processor found on the ZBOX edge CI343 offers the following features: Pentium-N6415 — 4C/4T, 1.2GHz – 3.0 […] ⌘ Read more
SinoVoip Co. launched today a new IoT board based on the ESP-S3 SoC. The BPI-Pico W-S3 is enabled with a 240MHz processor, 2.4GHz Wi-Fi/Bluetooth 5.0, ultra low-power mode and up to 27 GPIOs. As in the recently released BPI-Leaf-S3, the BPI-PicoW-S3 features the Xtensa 32-bit LX7 dual-core processor with clock frequency up to 240MHz. The […] ⌘ Read more
PJRC recently released a Teensy 4.1 variant without ethernet support but with more I/Os. The new Teensy 4.1\\_NE comes with the same processor as the Teensy 4.0, in this case a 32-bit ARM Cortex-M7 processor from NXP. The Teensy 4.1\\_NW features the NXP iMXRT1062 Cortex-M7 processor. The processor has a default frequency of 600MHz but […] ⌘ Read more
The e-RouteCAM\\_CU20 is a 2MP PoE (Power-over-Ethernet) GigE camera developed by e-con Systems. Additionally, the device integrates a high performance ISP to target low light applications. According to the datasheet, the RouteCAM\\_CU20 is a two board solution. The base board features an ethernet transceiver and an 8P PoE RJ45 connector. The other board […] ⌘ Read more
Khadas officially launched the Edge2 SBC featuring the powerful octa-core Rockchip RK3588S SoC along with a 6 TOPS performance NPU. The device is available in two models which offer upgradable RAM and Storage. The Edge is available in two versions. The Basic version comes with 8GB of RAM and 32GB of eMMC 5.1 flash storage. […] ⌘ Read more
Crowd Supply recently featured an open-source V853 Development board accommodating the high-performing V853 System-on-Chip (SoC). This device provides a 7” MIPI LCD, dual camera modules and many other peripherals to target AI-Vision applications. The V853 Dev board comes in a 4-layer PCB featuring a Cortex-A7 core (up to 1GHz), a RISC-V E906 core (up to […] ⌘ Read more
SB-Components recently launched a Raspberry Pi Hat integrating the ZED-F9P module which is a GNSS receiver that can simultaneously measure signals from constellations such as GLONASS, GPS, Galileo and BeiDou with 0.2 meters accuracy. The ZED-F9P is a positioning module that combines real time kinematics (RTK) and multi-band GNSS technology for applications that require centimeter-level […] ⌘ Read more
The Schoko Computer is a general-purpose computer featuring the Lattice ECP5 FPGA which can be configured as a RISC-V SoC capable of running Linux. The device is hand-assembled by the German company Machdyne and they ensured to provide support for firmware, software and other open-source tools. The ECP5 FPGA from Lattice Semiconductors found on the […] ⌘ Read more
The H96 MAX V58 is a TV Box equipped with the octa-core Rockchip RK3588 System on Chip (SoC) which features up to 8GB of RAM and up to 64GB of eMMC storage. The device supports dual band Wi-Fi 6 and a single GbE LAN port for fast connectivity. The H96 MAX V58 base model comes […] ⌘ Read more
OnLogic’s IGN800 is a fanless industrial-grade Edge Gateway powered by the Raspberry Pi CM4 and pre-loaded with Ignition Edge software. The device can be customized with up to 8GB of RAM, 32GB of eMMC storage, 2TB of SATA SSD and dual GbE LAN ports. The IGN800 accommodates the Raspberry Pi CM4 which features the Quad-Core […] ⌘ Read more
The de next-TGU8 is a compact size Single Board Computer integrating an on-board 11th Gen processor from Intel. The SBC comes with 16GB of onboard RAM and it supports dual displays, a SATA 3 port, dual GbE LAN ports, etc. The de next-TGU8 features the same processor found in other recent AAEON products, (i.e. RBX-I2000). […] ⌘ Read more
The NX6412-4L is a Mini-PC equipped with Intel’s Elkhart Lake Celeron J5412 processor developed by Maxtang. This fanless mini-PC offers flexible connectivity including up to four 2.5GbE LAN ports, Wi-Fi/ Bluetooth connectivity and a slot for SIM cards. The processor found on the NX6412-4L is the Elkhart Lake J6412 processor which has been featured in […] ⌘ Read more
German-based Imago Technologies recently unveiled an ultra-high performance General-Purpose GPU vision system designed for intensive applications such as AI and Computer Vision. The fanless Vision Box AI offers access to 12 Arm CPU cores, 64GB of RAM and up to 275 TOPS. The Vision Box AI integrates the latest Jetson AGX Orin 64GB model from […] ⌘ Read more
The MetaSense A075V and the MetaSense A010 are two open-source and low-cost Time of Flight (ToF) cameras designed to interface with microcontrollers and ROS1/ROS 2 based platforms. Both devices have an operating range from 0.2 to 2.0m with less than 1cm accuracy. According to the product page, the MetaSense A075V uses a Cortex A7 processor […] ⌘ Read more
The GMKtec Nucbox 5 Pro is a Mini-PC packed with Intel’s 11th Gen N5105 Celeron processor and it runs on Windows 11 Pro. The device comes with dual HDMI ports supporting 4K resolution, one GbE LAN port, Wi-Fi 6E/BL 5.2 connectivity and other features. Similarly to the GK3V Mini-PC featured recently, GMKtec is built around […] ⌘ Read more
Aaeon recently released their first 3.5” SubCompact board equipped with dual-channel DDR5 SODIMMs. The GENE-ADP6 integrates Intel’s 12th Gen/Celeron processors and flexible connectivity to suit AI edge computing applications. The GENE-ADP6 accommodates the following 12th Gen Alder Lake-P processors along with Intel’s Irix Xe Graphics for some of the models. i7-1270PE — 12C/16T, 3.30 – […] ⌘ Read more
The ROCK 4 SE Single Board Computer (SBC) is powered by the hexa-core Rockchip RK3399-T processor along with the Arm Mali T860 GPU. The device comes with 4GB of LPDDR4 RAM, an HDMI port with 4Kp60 support, Wi-Fi 5/BT5.0 connectivity and expandable storage via eMMC module and a M.2 connector. The Rockchip RK3399-T SoC features […] ⌘ Read more~
LILIGO’s T-SIMCAM is a development board featuring the ESP32-S3 System on Chip (SoC) enabled with Wi-Fi and BLE support. Additionally, this compact board features the OV2640 camera module, a SIM card slot and a mPCIe slot for T-PCIE SIM modules. The SoC found on the T-SIMCAM is the ESP32-S3R8 which features a dual-core LX7 Tensilica […] ⌘ Read more
The Tanix X4 and the TX8 Pro are two TV Box devices powered by Amlogic’s SoCs recently launched in the market. Both devices offer similar features including 4K resolution, ethernet and Wi-Fi/Bluetooth connectivity. The Tanix X4 TV Box features the Amlogic S905X4 SoC which combines an ARM-G31 MP2 GPU and a quad-core ARM-A55 processor (up […] ⌘ Read more
The Topton X6 is a fanless mini-PC powered by 12th Gen Intel Celeron processors. The device is being advertised as a router mini-PC since it includes up to 6 2.5GbE ports, up to 16GB of DDR4 RAM and up to 512GB of SSD storage. The Topton X6 accommodates the following 12th Gen Elkhart Lake processors […] ⌘ Read more
Seeed Studio XIAO Series consists of five thumb-sized Microcontrollers targeted to different embedded applications. These MCUs offer a variety of I/O peripherals and they are compatible with CircuitPython, Arduino in addition to TinyML. XIAO SAMD21: This device is based on Microchip’s SAMD21 processor (up to 48MHz) offering 32KB of SRAM and 256KB of onboard flash […] ⌘ Read more
Following the launch of the Hawkeye 64MP camera back in April, Arducam has recently launched a low-cost Time of Flight (ToF) camera specifically designed for the Raspberry Pi embedded platform. The operating depth range for this camera spans from 2m (±4cm) to 4m (±2cm) and it can be used in outdoor environments as well. According […] ⌘ Read more
The UR32L Lite is an industrial router with automated failback between ethernet and cellular connectivity. This router integrates a single ARM Cortex A7 processor, two 10/100Mbps LAN ports and a SIM slot. The UR32L is available for 109,80€. According to the UR32L datasheet, the industrial-grade processor featured is a single ARM Cortex-A7 with a maximum […] ⌘ Read more
MangoSBC announced yesterday the launch of the MQ-Quad MCore-H616 Single Board Computer (SBC). This SBC mirrors the Raspberry Pi form factor and it features the Allwinner H616 SoC (quad-core ARM Cortex-A53 processor) along with up to 1GB of RAM, one HDMI port, Wi-Fi4/BL4.2 support, etc. The Allwinner H616 is a quad-core ARM Cortex-A53 processor with […] ⌘ Read more~
Yesterday, Pine64 made an announcement about the Star64 Single Board Computer (SBC) prototype. The company mentioned this SBC will be powered with the RISC-V based StarFive JH7110 64-bit processor. The processor integrated on the Star64 is the same one found on the recently launched StarFive VisionFive 2 board. StarFive JH7110, – up to 1.5GHz, 64-bit […] ⌘ Read more
The GK3V is a Mini-PC equipped with the Celeron N5105 from Intel along with Intel’s UHD Graphics 24EUs. The device supports Wi-Fi6/BT 5.0, dual 4K displays via HDMI ports and customizable SSD storage. The GK3V comes with the Celeron N5105 processor which features a max frequency of 2.9GHz. The base model comes with 8GB of […] ⌘ Read more
Aeon unveiled yesterday their first outdoor autonomous robot controller based on 11th Gen Core/Celeron processors from Intel. The company claims that the latency of the RBX-I2000 has been reduced to ~20 nanoseconds compared to the 100 – 200 microseconds found in other similar devices. The processors supported by RBX-I2000 are shown below. These Intel Core […] ⌘ Read more~
The Bajiu Lite is a FPGA development board with an open-source RISC-V development environment called CRiscV. The open source CRiscV software seems to be based on VexRiscv customized for the Bajiu Lite board. The product has been developed by Dragon Li Studio and it will be launched via CrowdSupply. The Bajiu Lite product page doesn’t […] ⌘ Read more
The DR8072 V01 is a networking board based on the Qualcomm Atheros IPQ8072A System on Chip (SoC) which supports Wi-Fi 6. According to the developer company Wallystech, this board was optimized to provide users with high-bandwidth data transmission and robust performance in challenging RF environments. According to the IPQ8072A datasheet, the SoC offers four ARM […] ⌘ Read more
StarFive has just unveiled the VisionFive 2 Single Board Computer (SBC) which packs a quad-core JH7110 RISC-V processor. Some notable features include dual GbE ports, one M.2 M key, one HDMI port and many other peripherals. The base model comes with 2GB of RAM and it’s available for $47 on Kickstarter. As previously mentioned, the […] ⌘ Read more
Early this month, Avalue released two panel PC models supporting Intel’s Atom 6000E series processors and Intel’s 11th Gen Core i3/i5/i7 processors. The ARC-1535-B and the ARC-1538-B panel PCs share similar features including up to 32GB of RAM, one 2.5” drive bay and optional 5G and Wi-Fi 6 connectivity. According to Avalue’s announcement, the ARC-1535-B […] ⌘ Read more
Star Labs has recently launched the StarBook Mk VI which can accommodate the Ryzen 7 58000U and supports several Linux distributions. Additionally, the Starbook can integrate Intel 12th gen processors (i.e. i3-1220P, i7-1260P). The StarBook Mk VI can be configured to integrate one of the three following processors: i3-1220P — 2P+8E/10T, P-Cores: up to 4.40GHz, […] ⌘ Read more
The Morefine S600-Apex Engineer is a Mini PC built around the latest Intel’s i9-12900H/HK processor. The product comes in an aluminum-magnesium case offering features such as up to 64GB 3200 MHz of RAM, triple 4K displays, flexible storage expansion and a Wi-Fi 6/Bluetooth 5.2. According to the product page of Morefine S600, the processor supported […] ⌘ Read more
The IoT Redboard by SparkFun features a ES32 WROOM module enabled with Wi-Fi and Bluetooth 4.2. This development kit also provides an SD Card for data logging, a USB type-C, a Qwiic connector, a battery gauge and several other peripherals. The ESP32 module found in the IoT Redboard is the ESP32-D0WD-V3 which features a dual-core […] ⌘ Read more
The E500RM9 by Winmate, is a handheld rugged computer featuring a quad-core ARM Cortex-A53 and a quad-core ARM Cortex-A73 (up to 2.0GHz). The device also includes dual cameras, capacitive touchscreen, dual SIM slots, a 20Hr battery and many other optional upgrades. The E500RM9 comes with 4GB of RAM, 64GB of internal storage and Micro SD […] ⌘ Read more
The Wall Street Canyon by Simply NUC comes with Intel’s 12th Gen i3/i5/i7 processors and with support for four simultaneous displays with 4K graphics. The devices come in Slim and Tall models and they are highly customizable. Information about the i3 processor and its vPro version is not available yet. Simply NUC has listed the […] ⌘ Read more
The BOXER-8220AI Series from AAEON integrates the latest NVIDIA SoCs including the recent Jetson AGX Orin. The company has also announced a partnership with Cogniteam to develop ready-to-build robotic solutions for customers. The BOXER-8220AI series includes four products based on NVIDIA SoCs. In this case, the BOXER-8221AI (4GB LPDDR4 RAM Jetson Nano), the BOXER-8251AI (8GB […] ⌘ Read more
The Move-X Cicerone is a new low-power board that puts together the Move-X MAMWLE LoRa module and the u-blox MAX-M10S GNSS module. The Move-X Cicerone also integrates a Li-Po charging circuit for portability. The Move-X MAMWLE is a low power radio module based on the STM32WL which is an ARM M4 32-bit RISC core with […] ⌘ Read more