Empiezo el lunes. ⌘ Read more****
Verdades como garras. ⌘ Read more****
"cool down"... kinda
#running #injury
#running
#running
#running
#running #injury
#running
#running
#running
You can take the data that I posted, convert it into a binary, and then run it under DOS:
https://movq.de/v/054fae119b/
And boom, you get the output from the video. 🤯
(It probably also works in DOSBox, but I wouldn’t do that. Who knows what other stuff this magic binary does. 😂)
You can take the data that I posted, convert it into a binary, and then run it under DOS:
https://movq.de/v/054fae119b/
And boom, you get the output from the video. 🤯
(It probably also works in DOSBox, but I wouldn’t do that. Who knows what other stuff this magic binary does. 😂)
You can take the data that I posted, convert it into a binary, and then run it under DOS:
https://movq.de/v/054fae119b/
And boom, you get the output from the video. 🤯
(It probably also works in DOSBox, but I wouldn’t do that. Who knows what other stuff this magic binary does. 😂)
WinScrollWindow() which scrolls/moves existing window content and then you only draw the new parts. Maybe I’ll do that in a later version. 😅
WinScrollWindow() which scrolls/moves existing window content and then you only draw the new parts. Maybe I’ll do that in a later version. 😅
WinScrollWindow() which scrolls/moves existing window content and then you only draw the new parts. Maybe I’ll do that in a later version. 😅
https://movq.de/v/9b1c7016f6/MVI_7449.MOV.mp4
To me, it’s just super cool that I’m able to write programs for OS/2. 😎 That operating system will always hold a special place in my heart, I guess. It ran on my Model 80 back then (and maybe even the Model 30, but I'm not 100% sure anymore) and thus a lot of my earliest memories about using computers are OS/2 related. (And DOS related, of course. I had a dual boot setup on the Model 80, believe it or not …)
Anyway, writing that little program got much easier after I’ve found this page which contains a lot of valuable information:
https://komh.github.io/os2books/
This is a collection of OS/2 books by a person who’s apparently quite active in the realms of ArcaOS (one of OS/2’s “descendants”).
https://movq.de/v/9b1c7016f6/MVI_7449.MOV.mp4
To me, it’s just super cool that I’m able to write programs for OS/2. 😎 That operating system will always hold a special place in my heart, I guess. It ran on my Model 80 back then (and maybe even the Model 30, but I'm not 100% sure anymore) and thus a lot of my earliest memories about using computers are OS/2 related. (And DOS related, of course. I had a dual boot setup on the Model 80, believe it or not …)
Anyway, writing that little program got much easier after I’ve found this page which contains a lot of valuable information:
https://komh.github.io/os2books/
This is a collection of OS/2 books by a person who’s apparently quite active in the realms of ArcaOS (one of OS/2’s “descendants”).
https://movq.de/v/9b1c7016f6/MVI_7449.MOV.mp4
To me, it’s just super cool that I’m able to write programs for OS/2. 😎 That operating system will always hold a special place in my heart, I guess. It ran on my Model 80 back then (and maybe even the Model 30, but I'm not 100% sure anymore) and thus a lot of my earliest memories about using computers are OS/2 related. (And DOS related, of course. I had a dual boot setup on the Model 80, believe it or not …)
Anyway, writing that little program got much easier after I’ve found this page which contains a lot of valuable information:
https://komh.github.io/os2books/
This is a collection of OS/2 books by a person who’s apparently quite active in the realms of ArcaOS (one of OS/2’s “descendants”).
Ilustração de coelhos numa toca com a legenda "There are tunnels underground where bunnies are safe -- safe from emails"
Ilustração de coelhos numa toca com a legenda "There are tunnels underground where bunnies are safe -- safe from emails"
https://infosec.exchange/@harrysintonen/112196893735638837
I quote in full:
> Probably the single most impressive entry from the #Revision2024 #demoparty : Remnants by Alcatraz
>
> Here's the whole intro executable for your convenience:
>
> 68f69f07b013cd10d6bac90391eee2f9bbf601b8cdccf7e7720e41f6c13f7508804702058047082d80ee4c608d28bffcffdf45fcd809df470880fd017503de4405d9edd913df45fef6c1407402dcc2dcc0de4706df45fbd8097404d9cad9e0df47c95629fed918d91a7bf85eb929006029fed902d80bd800d9500cd9187bf1df01d900b10729fed94004d900d9c1d84ffed9c1d84ffedeebdec1d918d95804d9c156d9c2d8c0d900d8c4d9f5d9e1d94702decadee9d910dbf1dbd1ddd929fe7ae15edbf1dac1ddd9d913d907decae2b761ddd9d85f02dfe09e7602e292890d61260245ffd1e8aa83c72881f980010f8521ffc30c00b84c3ed53eca3e09c237ff
>
> video: https://www.youtube.com/watch?v=A9jn6ExjDw8
>
> pouet: https://www.pouet.net/prod.php?which=96536
This is absolutely crazy. 🤯🤯🤯
https://infosec.exchange/@harrysintonen/112196893735638837
I quote in full:
> Probably the single most impressive entry from the #Revision2024 #demoparty : Remnants by Alcatraz
>
> Here's the whole intro executable for your convenience:
>
> 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
>
> video: https://www.youtube.com/watch?v=A9jn6ExjDw8
>
> pouet: https://www.pouet.net/prod.php?which=96536
This is absolutely crazy. 🤯🤯🤯
https://infosec.exchange/@harrysintonen/112196893735638837
I quote in full:
> Probably the single most impressive entry from the #Revision2024 #demoparty : Remnants by Alcatraz
>
> Here's the whole intro executable for your convenience:
>
> 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
>
> video: https://www.youtube.com/watch?v=A9jn6ExjDw8
>
> pouet: https://www.pouet.net/prod.php?which=96536
This is absolutely crazy. 🤯🤯🤯
At the moment, I mostly use one 128 MB CF card with OS/2 2.1 on it. That OS didn’t really have lots of network capabilities out of the box, so once again I’m using zmodem over a serial line to transfer data to/from other machines, just like I do with MS-DOS 5.0.
Tomorrow, I plan on doing some more work on my OS/2 GUI program. (Let’s see if I actually get to do it. 😂)
By the way, OS/2 2.0 turned 32 years today. 🥳
[](https://movq.de/v/7e6715e687/cf.ff.jpg)
[](https://movq.de/v/7e6715e687/pmworldglobe.ff.jpg)
[](https://movq.de/v/7e6715e687/zmodem.ff.jpg)
At the moment, I mostly use one 128 MB CF card with OS/2 2.1 on it. That OS didn’t really have lots of network capabilities out of the box, so once again I’m using zmodem over a serial line to transfer data to/from other machines, just like I do with MS-DOS 5.0.
Tomorrow, I plan on doing some more work on my OS/2 GUI program. (Let’s see if I actually get to do it. 😂)
By the way, OS/2 2.0 turned 32 years today. 🥳
[](https://movq.de/v/7e6715e687/cf.ff.jpg)
[](https://movq.de/v/7e6715e687/pmworldglobe.ff.jpg)
[](https://movq.de/v/7e6715e687/zmodem.ff.jpg)
At the moment, I mostly use one 128 MB CF card with OS/2 2.1 on it. That OS didn’t really have lots of network capabilities out of the box, so once again I’m using zmodem over a serial line to transfer data to/from other machines, just like I do with MS-DOS 5.0.
Tomorrow, I plan on doing some more work on my OS/2 GUI program. (Let’s see if I actually get to do it. 😂)
By the way, OS/2 2.0 turned 32 years today. 🥳
[](https://movq.de/v/7e6715e687/cf.ff.jpg)
[](https://movq.de/v/7e6715e687/pmworldglobe.ff.jpg)
[](https://movq.de/v/7e6715e687/zmodem.ff.jpg)
I have
~/music and then a folder for each artist. Each album gets its own subfolder. That’s pretty much it.[](https://movq.de/v/685da37314/s.png)
I usually use
mpd for playing, sometimes mpv. I could use something simpler, I guess, but I’ve been an mpd use since at least 2009 and it just works. (I used Audacious, XMMS2, and, well, WinAmp before that. And sometimes MP3Blaster at the end of the 1990ies, but at that time I didn’t have a lot of music on my PC anyway.)A long time ago, I had
.m3u playlists for each genre, but I found that I don’t use that a lot. I usually just play what I’d like to hear right now.As for tagging, I just do the basic things like artist, title, album name, so I get a somewhat meaningful display in
ncmpcpp:[](https://movq.de/v/685da37314/s.png)
I usually use
mpd for playing, sometimes mpv. I could use something simpler, I guess, but I’ve been an mpd use since at least 2009 and it just works. (I used Audacious, XMMS2, and, well, WinAmp before that. And sometimes MP3Blaster at the end of the 1990ies, but at that time I didn’t have a lot of music on my PC anyway.)A long time ago, I had
.m3u playlists for each genre, but I found that I don’t use that a lot. I usually just play what I’d like to hear right now.As for tagging, I just do the basic things like artist, title, album name, so I get a somewhat meaningful display in
ncmpcpp:[](https://movq.de/v/a3bfaf1a70/s.png)
Virtually all the music on my hard disk is ripped from CDs that I physically own. The script that I use for ripping is *ancient*, like 17 years old. But it still works, so why bother. It apparently uses
icedax for querying the CDDB and the actual ripping, then oggenc for encoding.Probably the most elaborate/convoluted part of my sound setup is the use of LADSPA filters directly in PipeWire. I have crappy speakers and the filters do some EQ and maybe compression. That’s also super handy in today’s abundant video calls and also for watching movies. (I disable the filter chain if I switch to my headphones.)
https://www.uninformativ.de/blog/postings/2020-02-09/0/POSTING-en.html
I have
~/music and then a folder for each artist. Each album gets its own subfolder. That’s pretty much it.[](https://movq.de/v/685da37314/s.png)
I usually use
mpd for playing, sometimes mpv. I could use something simpler, I guess, but I’ve been an mpd use since at least 2009 and it just works. (I used Audacious, XMMS2, and, well, WinAmp before that. And sometimes MP3Blaster at the end of the 1990ies, but at that time I didn’t have a lot of music on my PC anyway.)A long time ago, I had
.m3u playlists for each genre, but I found that I don’t use that a lot. I usually just play what I’d like to hear right now.As for tagging, I just do the basic things like artist, title, album name, so I get a somewhat meaningful display in
ncmpcpp:[](https://movq.de/v/a3bfaf1a70/s.png)
Virtually all the music on my hard disk is ripped from CDs that I physically own. The script that I use for ripping is *ancient*, like 17 years old. But it still works, so why bother. It apparently uses
icedax for querying the CDDB and the actual ripping, then oggenc for encoding.Probably the most elaborate/convoluted part of my sound setup is the use of LADSPA filters directly in PipeWire. I have crappy speakers and the filters do some EQ and maybe compression. That’s also super handy in today’s abundant video calls and also for watching movies. (I disable the filter chain if I switch to my headphones.)
https://www.uninformativ.de/blog/postings/2020-02-09/0/POSTING-en.html
I have
~/music and then a folder for each artist. Each album gets its own subfolder. That’s pretty much it.[](https://movq.de/v/685da37314/s.png)
I usually use
mpd for playing, sometimes mpv. I could use something simpler, I guess, but I’ve been an mpd use since at least 2009 and it just works. (I used Audacious, XMMS2, and, well, WinAmp before that. And sometimes MP3Blaster at the end of the 1990ies, but at that time I didn’t have a lot of music on my PC anyway.)A long time ago, I had
.m3u playlists for each genre, but I found that I don’t use that a lot. I usually just play what I’d like to hear right now.As for tagging, I just do the basic things like artist, title, album name, so I get a somewhat meaningful display in
ncmpcpp:[](https://movq.de/v/a3bfaf1a70/s.png)
Virtually all the music on my hard disk is ripped from CDs that I physically own. The script that I use for ripping is *ancient*, like 17 years old. But it still works, so why bother. It apparently uses
icedax for querying the CDDB and the actual ripping, then oggenc for encoding.Probably the most elaborate/convoluted part of my sound setup is the use of LADSPA filters directly in PipeWire. I have crappy speakers and the filters do some EQ and maybe compression. That’s also super handy in today’s abundant video calls and also for watching movies. (I disable the filter chain if I switch to my headphones.)
https://www.uninformativ.de/blog/postings/2020-02-09/0/POSTING-en.html
#running #treadmill
#running #treadmill
#running #treadmill
#running #treadmill
#catsoftwtxt
#catsoftwtxt