Looks like FreeCAD works fine and I think this is a more appropriate program anyway. 😊
Looks like FreeCAD works fine and I think this is a more appropriate program anyway. 😊
download.pl in its URL. LOL.
Blender 2.4 series kid of old!? 🤔
Blender 2.4 series kid of old!? 🤔
Blender 2.4 series kid of old!? 🤔
- If you're willing to pay for a licence I'd highly recommend plasticity it's under
GNU LESSER GENERAL PUBLIC LICENSE, Version 3.- Otherwise if you already have experience with CAD/Parametric modeling you could give freeCAD a spin, it's under
GNU Library General Public License, version 2.0, it took them years but have just recently shipped their v1.0 👍- or just roll with Autodesk's Fusion for personal use, if you don't mind their "Oh! You need to be online to use it" thing.
> (Let’s face it, Blender is hard to use.)
I bet you're talking about blender 2.79 and older! 😂 you are, right? _JK_
- If you're willing to pay for a licence I'd highly recommend plasticity it's under
GNU LESSER GENERAL PUBLIC LICENSE, Version 3.- Otherwise if you already have experience with CAD/Parametric modeling you could give freeCAD a spin, it's under
GNU Library General Public License, version 2.0, it took them years but have just recently shipped their v1.0 👍- or just roll with Autodesk's Fusion for personal use, if you don't mind their "Oh! You need to be online to use it" thing.
> (Let’s face it, Blender is hard to use.)
I bet you're talking about blender 2.79 and older! 😂 you are, right? _JK_
- If you're willing to pay for a licence I'd highly recommend plasticity it's under
GNU LESSER GENERAL PUBLIC LICENSE, Version 3.- Otherwise if you already have experience with CAD/Parametric modeling you could give freeCAD a spin, it's under
GNU Library General Public License, version 2.0, it took them years but have just recently shipped their v1.0 👍- or just roll with Autodesk's Fusion for personal use, if you don't mind their "Oh! You need to be online to use it" thing.
> (Let’s face it, Blender is hard to use.)
I bet you're talking about blender 2.79 and older! 😂 you are, right? _JK_
I didn’t end up using that, either. 🥴
In general, I print very little. So little that some of my supplies have simply gone bad, like that “3D LAC” (sprayable glue).
@aelaraji Yeah, I saw that when googling the issue. I’m on Linux, there are no DLLs to swap. I could use an older version indeed. 🤔 Let’s see if I can find some better alternative first. (Let’s face it, Blender is hard to use.)
I didn’t end up using that, either. 🥴
In general, I print very little. So little that some of my supplies have simply gone bad, like that “3D LAC” (sprayable glue).
@aelaraji Yeah, I saw that when googling the issue. I’m on Linux, there are no DLLs to swap. I could use an older version indeed. 🤔 Let’s see if I can find some better alternative first. (Let’s face it, Blender is hard to use.)
I didn’t end up using that, either. 🥴
In general, I print very little. So little that some of my supplies have simply gone bad, like that “3D LAC” (sprayable glue).
@aelaraji Yeah, I saw that when googling the issue. I’m on Linux, there are no DLLs to swap. I could use an older version indeed. 🤔 Let’s see if I can find some better alternative first. (Let’s face it, Blender is hard to use.)
I didn’t end up using that, either. 🥴
In general, I print very little. So little that some of my supplies have simply gone bad, like that “3D LAC” (sprayable glue).
@aelaraji Yeah, I saw that when googling the issue. I’m on Linux, there are no DLLs to swap. I could use an older version indeed. 🤔 Let’s see if I can find some better alternative first. (Let’s face it, Blender is hard to use.)
Fern
prologic and _doesnm__ is just 7! :-D
On a more serious note, what things did you 3D-print?
Luckily, I do not have to deal with that UI from hell for three and a half weeks very soon.
https://www.youtube.com/watch?v=HfOq05Y_vwA
https://www.youtube.com/watch?v=HfOq05Y_vwA
“A graphics card and driver with support for OpenGL 4.3 or higher is required. Installing the latest driver for your graphics card might resolve the issue.”A bit annoying, but not much of a problem. The only thing I did with Blender was make some very simple 3D-printable objects.
I’ll have a look at the alternatives out there. Worst case is I go back to Art of Illusion, which I used heavily ~15 years ago.~
“A graphics card and driver with support for OpenGL 4.3 or higher is required. Installing the latest driver for your graphics card might resolve the issue.”A bit annoying, but not much of a problem. The only thing I did with Blender was make some very simple 3D-printable objects.
I’ll have a look at the alternatives out there. Worst case is I go back to Art of Illusion, which I used heavily ~15 years ago.~
“A graphics card and driver with support for OpenGL 4.3 or higher is required. Installing the latest driver for your graphics card might resolve the issue.”A bit annoying, but not much of a problem. The only thing I did with Blender was make some very simple 3D-printable objects.
I’ll have a look at the alternatives out there. Worst case is I go back to Art of Illusion, which I used heavily ~15 years ago.~
“A graphics card and driver with support for OpenGL 4.3 or higher is required. Installing the latest driver for your graphics card might resolve the issue.”A bit annoying, but not much of a problem. The only thing I did with Blender was make some very simple 3D-printable objects.
I’ll have a look at the alternatives out there. Worst case is I go back to Art of Illusion, which I used heavily ~15 years ago.~
/https://duque-terron.cat/media/photos/IMG_2929.jpeg) #catsoftwtxt
#catsoftwtxt
#catsoftwtxt
https://www.dn.pt/223016928/compositor-luis-tinoco-vence-premio-pessoa-2024/
https://www.dn.pt/223016928/compositor-luis-tinoco-vence-premio-pessoa-2024/
t
# nick = eapl.me
# url = https://eapl.me/tw.txt
# url = https://eapl.me/twtxt.txt
or ...
t
# url = https://eapl.me/tw.txt
# prev = https://eapl.me/twtxt.txt
t
# nick = eapl.me
# url = https://eapl.me/tw.txt
# url = https://eapl.me/twtxt.txt
or ...
t
# url = https://eapl.me/tw.txt
# prev = https://eapl.me/twtxt.txt
t
# nick = eapl.me
# url = https://eapl.me/tw.txt
# url = https://eapl.me/twtxt.txt
or ...
t
# url = https://eapl.me/tw.txt
# prev = https://eapl.me/twtxt.txt