# I am the Watcher. I am your guide through this vast new twtiverse.
#
# Usage:
# https://watcher.sour.is/api/plain/users View list of users and latest twt date.
# https://watcher.sour.is/api/plain/twt View all twts.
# https://watcher.sour.is/api/plain/mentions?uri=:uri View all mentions for uri.
# https://watcher.sour.is/api/plain/conv/:hash View all twts for a conversation subject.
#
# Options:
# uri Filter to show a specific users twts.
# offset Start index for quey.
# limit Count of items to return (going back in time).
#
# twt range = 1 194761
# self = https://watcher.sour.is?offset=179534
# next = https://watcher.sour.is?offset=179634
# prev = https://watcher.sour.is?offset=179434
@movq that's not THAT old! it still can kick a$$ 👍
@movq that's not THAT old! it still can kick a$$ 👍
@movq that's not THAT old! it still can kick a$$ 👍
There appears to be no standards in terms of boot loader on ARM 🤔 This makes things a bit hard™
There appears to be no standards in terms of boot loader on ARM 🤔 This makes things a bit hard™
Threshold: 7.00 miles, 00:09:14 average pace, 01:04:37 duration
did not know what this would be like when i set out. turned out to be a bit of a threshold workout, but did not hurt much. generally a nice day out and a good run even if the legs were heavy.
#running
Threshold: 7.00 miles, 00:09:14 average pace, 01:04:37 duration
did not know what this would be like when i set out. turned out to be a bit of a threshold workout, but did not hurt much. generally a nice day out and a good run even if the legs were heavy.
#running
Threshold: 7.00 miles, 00:09:14 average pace, 01:04:37 duration
did not know what this would be like when i set out. turned out to be a bit of a threshold workout, but did not hurt much. generally a nice day out and a good run even if the legs were heavy.
#running
@aelaraji This is an Intel i7-3770 from 2013 with an integrated GPU (HD 4000).
Looks like FreeCAD works fine and I think this is a more appropriate program anyway. 😊
@aelaraji This is an Intel i7-3770 from 2013 with an integrated GPU (HD 4000).
Looks like FreeCAD works fine and I think this is a more appropriate program anyway. 😊
@aelaraji This is an Intel i7-3770 from 2013 with an integrated GPU (HD 4000).
Looks like FreeCAD works fine and I think this is a more appropriate program anyway. 😊
@aelaraji This is an Intel i7-3770 from 2013 with an integrated GPU (HD 4000).
Looks like FreeCAD works fine and I think this is a more appropriate program anyway. 😊
@aelaraji SolveSpace tells its age by having a download.pl in its URL. LOL.
All this, really makes me want to touch some Blender, it's been a while since last time I did xD ... I'd better give it a spin while I still can xD.
All this, really makes me want to touch some Blender, it's been a while since last time I did xD ... I'd better give it a spin while I still can xD.
All this, really makes me want to touch some Blender, it's been a while since last time I did xD ... I'd better give it a spin while I still can xD.
@prologic well, that's how software evolves, no? I mean, there is certain kind of software that benefits from advances in which newer, more capable hardware, is involved. But I get what you mean too! :-D
found it, it's '-video_size'
found it, it's '-video_size'
@bender Hmmm... it makes sense. Now I curious, how old is his hardware though? is it SolveSpace kind of old? or reaaaally Blender 2.4 series kid of old!? 🤔
@bender Hmmm... it makes sense. Now I curious, how old is his hardware though? is it SolveSpace kind of old? or reaaaally Blender 2.4 series kid of old!? 🤔
@bender Hmmm... it makes sense. Now I curious, how old is his hardware though? is it SolveSpace kind of old? or reaaaally Blender 2.4 series kid of old!? 🤔
@bender And technically even that's not really the problem either 🤣 The software devs have decided to update the minimum hardware requirements. Maybe that's legit (_API changes_) maybe not 🤔
@bender And technically even that's not really the problem either 🤣 The software devs have decided to update the minimum hardware requirements. Maybe that's legit (_API changes_) maybe not 🤔
@aelaraji will all those run on his hardware? I don't think @movq's problem is the software, it is that his hardware has gotten too old. :-D
I used to display on my laptop what is displayed behing my back with ffmpeg, using 'ffplay -f x11grab -s 800x600 -i :0.0+1366,0', but it seems -s flag no longer exist. How do I set the resolution please?
I used to display on my laptop what is displayed behing my back with ffmpeg, using 'ffplay -f x11grab -s 800x600 -i :0.0+1366,0', but it seems -s flag no longer exist. How do I set the resolution please?
[47°09′55″S, 126°43′25″W] Resetting dosimeter
@movq I know, nobody asked 🤡 but, here are a couple of suggestions:
- If you're willing to pay for a licence I'd highly recommend plasticity it's under GNU LESSER GENERAL PUBLIC LICENSE, Version 3.
- Otherwise if you already have experience with CAD/Parametric modeling you could give freeCAD a spin, it's under GNU Library General Public License, version 2.0, it took them years but have just recently shipped their v1.0 👍
- or just roll with Autodesk's Fusion for personal use, if you don't mind their "Oh! You need to be online to use it" thing.
> (Let’s face it, Blender is hard to use.)
I bet you're talking about blender 2.79 and older! 😂 you are, right? _JK_
@movq I know, nobody asked 🤡 but, here are a couple of suggestions:
- If you're willing to pay for a licence I'd highly recommend plasticity it's under GNU LESSER GENERAL PUBLIC LICENSE, Version 3.
- Otherwise if you already have experience with CAD/Parametric modeling you could give freeCAD a spin, it's under GNU Library General Public License, version 2.0, it took them years but have just recently shipped their v1.0 👍
- or just roll with Autodesk's Fusion for personal use, if you don't mind their "Oh! You need to be online to use it" thing.
> (Let’s face it, Blender is hard to use.)
I bet you're talking about blender 2.79 and older! 😂 you are, right? _JK_
@movq I know, nobody asked 🤡 but, here are a couple of suggestions:
- If you're willing to pay for a licence I'd highly recommend plasticity it's under GNU LESSER GENERAL PUBLIC LICENSE, Version 3.
- Otherwise if you already have experience with CAD/Parametric modeling you could give freeCAD a spin, it's under GNU Library General Public License, version 2.0, it took them years but have just recently shipped their v1.0 👍
- or just roll with Autodesk's Fusion for personal use, if you don't mind their "Oh! You need to be online to use it" thing.
> (Let’s face it, Blender is hard to use.)
I bet you're talking about blender 2.79 and older! 😂 you are, right? _JK_
❤️ 🎶: Fly by Baek Z Young
[47°09′37″S, 126°43′54″W] Dosimeter overflow
❤️ 🎶: How About You by CHEEZE
❤️ 🎶: Yes by Yoon Jong Shin, MINSEO
❤️ 🎶: My Spring by LEE SUHYUN
@lyse Ooohh, nice and long vacation! 😃
@lyse Ooohh, nice and long vacation! 😃
@lyse Ooohh, nice and long vacation! 😃
@lyse Ooohh, nice and long vacation! 😃
@lyse Mostly small and simple stuff, like cable management, headphone rests, pill dispensers (that I didn’t end up using), … The most elaborate thing I made was that contraption for my keyboard, which is a bit hard to explain right now, so here’s some photos:
I didn’t end up using that, either. 🥴
In general, I print very little. So little that some of my supplies have simply gone bad, like that “3D LAC” (sprayable glue).
@aelaraji Yeah, I saw that when googling the issue. I’m on Linux, there are no DLLs to swap. I could use an older version indeed. 🤔 Let’s see if I can find some better alternative first. (Let’s face it, Blender is hard to use.)
@lyse Mostly small and simple stuff, like cable management, headphone rests, pill dispensers (that I didn’t end up using), … The most elaborate thing I made was that contraption for my keyboard, which is a bit hard to explain right now, so here’s some photos:
I didn’t end up using that, either. 🥴
In general, I print very little. So little that some of my supplies have simply gone bad, like that “3D LAC” (sprayable glue).
@aelaraji Yeah, I saw that when googling the issue. I’m on Linux, there are no DLLs to swap. I could use an older version indeed. 🤔 Let’s see if I can find some better alternative first. (Let’s face it, Blender is hard to use.)
@lyse Mostly small and simple stuff, like cable management, headphone rests, pill dispensers (that I didn’t end up using), … The most elaborate thing I made was that contraption for my keyboard, which is a bit hard to explain right now, so here’s some photos:
I didn’t end up using that, either. 🥴
In general, I print very little. So little that some of my supplies have simply gone bad, like that “3D LAC” (sprayable glue).
@aelaraji Yeah, I saw that when googling the issue. I’m on Linux, there are no DLLs to swap. I could use an older version indeed. 🤔 Let’s see if I can find some better alternative first. (Let’s face it, Blender is hard to use.)
@lyse Mostly small and simple stuff, like cable management, headphone rests, pill dispensers (that I didn’t end up using), … The most elaborate thing I made was that contraption for my keyboard, which is a bit hard to explain right now, so here’s some photos:
I didn’t end up using that, either. 🥴
In general, I print very little. So little that some of my supplies have simply gone bad, like that “3D LAC” (sprayable glue).
@aelaraji Yeah, I saw that when googling the issue. I’m on Linux, there are no DLLs to swap. I could use an older version indeed. 🤔 Let’s see if I can find some better alternative first. (Let’s face it, Blender is hard to use.)
[47°09′22″S, 126°43′23″W] Dosimeter still failing
@lime360 Welcome yo Twtxt / Yarn.social 👋
@lime360 Welcome yo Twtxt / Yarn.social 👋
🧮 USERS:1 FEEDS:2 TWTS:1182 ARCHIVED:82725 CACHE:2585 FOLLOWERS:17 FOLLOWING:14
I really, really have to go get some sleep. If you see me online before at least 6 hours, punch me in the face!
I really, really have to go get some sleep. If you see me online before at least 6 hours, punch me in the face!
I really, really have to go get some sleep. If you see me online before at least 6 hours, punch me in the face!
@movq Damn! I've been there, and it sucks when it comes to that. and I may be hallucinating but I believe there was some dll file I had to download and put somewhere in blender's folder and that got it to work back then. Also, what's the latest version of #blender you could run?
@movq Damn! I've been there, and it sucks when it comes to that. and I may be hallucinating but I believe there was some dll file I had to download and put somewhere in blender's folder and that got it to work back then. Also, what's the latest version of #blender you could run?
@movq Damn! I've been there, and it sucks when it comes to that. and I may be hallucinating but I believe there was some dll file I had to download and put somewhere in blender's folder and that got it to work back then. Also, what's the latest version of #blender you could run?
@lyse Nah, that's definitely my sleep deprivation ... I should stop effing with vim when I'm sleepy 😅
@bender I totally get you! I too have my weechat running remotely as well as The Lounge for when I'm on the move, but still, I do love shiny new toys when I find some 🤩
@lyse HAHAHA! 🤣 I love this one!
Enjoyed the eight christmas party at work today with some colleagues who I have known and worked with for more than ten years now. That is a nice feeling.
Enjoyed the eight christmas party at work today with some colleagues who I have known and worked with for more than ten years now. That is a nice feeling.
[47°09′58″S, 126°43′58″W] Dosimeter malfunction
No surprise, @skinshafi, they can be easily mixed up. See, the hemming distance between prologic and _doesnm__ is just 7! :-D
@movq Fear not, there is probably Paint on DOS! :-D
On a more serious note, what things did you 3D-print?
Yeah, @eapl.me, I kinda like file extensions in some situations. What do you think of twtxt.exe, @bender? ]:->
Yeah, @movq! "Sorry boss, I accidentally removed the bug report, because the button suddenly materialized under my cursor." :-D
Luckily, I do not have to deal with that UI from hell for three and a half weeks very soon.
@skinshafi I tried it (still have it installed on work laptop), didn't like it. The comfort I get from having a web based IRC client (and bouncer) available at all times, from everywhere, can't be easily replaced. :-)
Agreed, @bender, bad typography always kills it for me, too.
[47°09′43″S, 126°43′28″W] Storm recedes -- back to normal work
Música para chorar no #musiQuinta , e eu fui aos anos 90 para ir buscar uma das melhores bandas Portuguesas de sempre, os #Desire com o seu "When Sorrow Embraces My Heart" (do EP "Pentacrow"):
https://www.youtube.com/watch?v=HfOq05Y_vwA
Música para chorar no #musiQuinta , e eu fui aos anos 90 para ir buscar uma das melhores bandas Portuguesas de sempre, os #Desire com o seu "When Sorrow Embraces My Heart" (do EP "Pentacrow"):
https://www.youtube.com/watch?v=HfOq05Y_vwA
LMAO! 🤣 I've had @doesnm's nick linked to @prologic's url for this feed the whole time !! 🤦
There's this something about this Halloy #IRC client's look I can't find a proper word for. Aesthetically pleasing maybe? anyway, it feels nice.
Goodbye Blender, I guess? 🤔
“A graphics card and driver with support for OpenGL 4.3 or higher is required. Installing the latest driver for your graphics card might resolve the issue.”
A bit annoying, but not much of a problem. The only thing I did with Blender was make some very simple 3D-printable objects.
I’ll have a look at the alternatives out there. Worst case is I go back to Art of Illusion, which I used heavily ~15 years ago.~
Goodbye Blender, I guess? 🤔
“A graphics card and driver with support for OpenGL 4.3 or higher is required. Installing the latest driver for your graphics card might resolve the issue.”
A bit annoying, but not much of a problem. The only thing I did with Blender was make some very simple 3D-printable objects.
I’ll have a look at the alternatives out there. Worst case is I go back to Art of Illusion, which I used heavily ~15 years ago.~
Goodbye Blender, I guess? 🤔
“A graphics card and driver with support for OpenGL 4.3 or higher is required. Installing the latest driver for your graphics card might resolve the issue.”
A bit annoying, but not much of a problem. The only thing I did with Blender was make some very simple 3D-printable objects.
I’ll have a look at the alternatives out there. Worst case is I go back to Art of Illusion, which I used heavily ~15 years ago.~
Goodbye Blender, I guess? 🤔
“A graphics card and driver with support for OpenGL 4.3 or higher is required. Installing the latest driver for your graphics card might resolve the issue.”
A bit annoying, but not much of a problem. The only thing I did with Blender was make some very simple 3D-printable objects.
I’ll have a look at the alternatives out there. Worst case is I go back to Art of Illusion, which I used heavily ~15 years ago.~
@prologic well, you have a Mac Studio, and I have no Mac, at all. I would happily trade my iPhone 16 Pro for an 11 Max, if I had a Mac Studio. :-D
Test post from IndiePass app
El gato fantasma de la ópera
#catsoftwtxt
El gato fantasma de la ópera
#catsoftwtxt
Micropub test of creating a basic h-entry
Fern
/https://duque-terron.cat/media/photos/IMG_2929.jpeg) #catsoftwtxt